|
|
 |
3D Revit Files Now Available |
|
We’re making it easier for you to incorporate our glazing systems into your building models. CRL-U.S. Aluminum 3D Revit files can now be downloaded from either Autodesk Seek or crl-arch.com and integrated into your architectural drawings. We offer 3D Revit files for storefronts, curtain walls, and entrance systems. If your project requires BIM, we’ve got you covered.
|
|
|
| |
|
|
| |
 |
|
| |
Need Shop Drawings?
Our Drafting Division can produce complete shop drawings ready for your check and submittal to the prime general contractor and architect. These detailed drawings will show the material, shape, size, and assembly of our products and illustrate exactly how the entire system will attach to the building substrate per the architectural drawings and specifications. Shop drawings are produced in AutoCAD .dwg format, in PDF, or in print versions that can be shipped in 11" x 17" Engineering B (ANSI B) and 24" x 36" Architectural D (ARCH D) paper sizes.
|
|
|
 |
 |
Case Study: Colours Condos
Named for its two-story exterior envelope of glass partitions in various hues, Colours Condos is a mixed-use residential tower that embodies modern day living in Downtown Calgary. CRL-U.S. Aluminum products can be found throughout the complex. The versatile Series 3250 Curtain Wall System defines the building’s lower level façade. The residential units spanning the higher tower floors are enveloped in Series 3150 Curtain Wall. Series 400 Medium Stile Entrance Doors were specified for the ground floor, while residential units are outfitted with Series 900 Terrace Doors.
|
|
|
 |
NFRC Certified High Performance Systems You Can Rely On
CRL-U.S. Aluminum holds its products up to the highest standards and is proud to offer a wide selection of NFRC rated glazing solutions. Our systems are tested for code compliance in accordance with NFRC 100/200 and AAMA 507 so they meet your project needs. To support our ratings, we offer bid reports and site built certificates that show our products meet both building specifications and local energy code requirements. Project-specific U-factor calculations are available utilizing NFRC’s Component Modeling Approach Software Tool (CMAST).
|
|
|
 |
 |
|
©