|
|
DRS 1202 Swinging Door System Wins Doors Category in Record Products Competition |
|
Our new DRS 1202 Swinging Door System took home top honors in the Doors category during Architectural Record’s 2016 “Record Products” competition! This one-of-a-kind entrance system requires no top or bottom rail, resulting in a distinct all-glass aesthetic. This is made possible by a unique hydraulic closing mechanism that’s concealed within the slim 2" vertical pivot tube. As an added benefit, installation is simplified because you no longer need to cut into the floor to install a door closer. Customizable features include:
- Door Heights Up to 96"
- Glass or Wall Mountable
- Five Architectural Finishes
- Three Different Spring Tensions for Closing Mechanism
- Transom Hardware for Openings Up to 127" Tall
- 3/8" or 1/2" Tempered Glass Sizes
DRS 1202 Series Door Kits are available with glass already installed to make your job easier.
|
|
|
|
|
|
|
|
|
|
Guest Editorial:
ADA Compliant Entrances
CRL’s Joe Schiavone was a guest contributor in a recent Glass Magazine article that discussed important factors to consider when installing ADA compliant entrance systems. It covered topics such as clear widths, thresholds, maneuvering clearances, and closing speeds. Take a moment to read the article so you can better understand ADA requirements for doors and doorways.
|
|
|
|
|
NEW Side Load Bottom Patch Fitting with Adjustable Pivot Now Available
|
|
Our new bottom patch fitting is designed with a side-load patch insert in order to accommodate an adjustable bottom center-hung pivot. The installer-friendly pivot provides up to 3/16" of door height adjustment and, unlike traditional bottom patch fittings, doesn’t require drilling large holes into the floor for installation.
|
|
|
|
Increase Security Using NEW Electric Strike Keeper with Bolt Position Sensor
Having a door latch sensor is a practical way to ensure safety and security; having one that can tell you if the doors are locked as well is even better! We’ve upgraded our Electric Strike Housing with an integrated Bolt Position Sensor that will notify facility personnel if doors are closed and locked. This increases security and convenience.
The Electric Strike Keeper with Bolt Position Sensor is compatible with most building security and fire safety systems. It permits use of card readers, RFID badges, and remote door monitors and controls. It’s suitable for 1/2" and 3/4" tempered glass doors, and can be used in conjunction with our Blumcraft panic and deadbolt handles.
|
|
|
|
|